How to Install Wheel Spacers? You Really Need to Know

I'll go to the details that how to install wheel spacers but before that I'll take a moment to describe what a wheel spacer is and why they're a great tool for your wheel.

Wheel spacers are a metal device that fits over a vehicle's holding bracket to increase the distance of the 2 wheels on the same axle. It makes tires larger and increases the width on the left and right sides.

There are different purposes of wheel spacers which are important to upgrade your tires. It comes with a variety of thicknesses. It locates the wheel farther in a distance from the hub.

First thing is, a wheel spacer adapter can change tires' appearances and makes it more attractive. As the wheel extends a little so the wheel eyebrow is flush with the outside of the wheel. By locating the wheel spacer in a more visually aggressive position, it makes the wheel looks better.

Secondly, Due to the addition of a wheel spacer, the wheel increases the stability and better handling capacity. So the wheel spacer often used in race cars.

Moreover, the increased length, width, and height levels are not synchronized and the speed is high and turning is easy for vehicles.

How to Install Wheel Spacers

I am here to show you How to Install Wheel Spacers step by step. Let's go through the process.

Installing Wheel Spacers By 8 Steps.

1

The Follwing Items You will Need to Install

You will need a floor jack to slide under the car, a Lug wrench to loosen or tighten nuts and Jack stands to lift your vehicles so that you can install wheel spacer easily.

Furthermore, arrange degreaser to remove spots from machines or hard surfaces, Rags to clean the surface and Torque wrench to tighten or adjust bolts with you.

2

Place your car or truck on a level surface

Now loosen the lug nuts which is used to fasten the wheel. To jack up the car stage a floor jack under the car at the proper position. Keep the car on a jack, lower it and repeat the process. Finally, when the four corners are supported on the jack, start the second step.


3

Unknot the lug nuts of the vehicles

Move smoothly the wheels off the hub and locate them out of the place. Spray with any spot remover on the lug spot and wipe them with a rug to clean it well. Use a wire brush if it's very dirty and unable to wash it with a normal rug. Also, clean the hub surface where you have to install the wheel spacer.

4

Slide the wheel spacer to the studs

If the wheel spacer is not the bolt-on type then move it onto the studs. Keep moving the spacer until it seats well in the hub by lining the holes with wheel studs in the spacer up. Some models of cars may use lug bolts instead of a bolt-on. In this case, you can simply line up the spacer. Remove the lug nuts completely off of the wheel.

5

Install the wheel spacer to the studs

Don't use the factory log if you use the lug nut came with it. It may come with the spacer but you can also find it in any hardware stores. Attach the wheel spacer with the lug nuts and round it towards the car. Carefully place the lug nuts in the appropriate place and tighten them using a socket.

6

Repeat the same process every corner of the vehicles.

Keep re-installing the wheel spacer with the lug wrench but don't tighten them now. Remember to take-off the jack stand first and lower the car. Then tighten the nuts of the wheel spacer carefully.

7

Slide the floor jack under the vehicle

Use a floor jack to make space for you under the car and lift up the vehicle. It will help you to remove the jack stands. Then lower the vehicle every corner, one by one.

8

Take the help of a torque wrench to tighten the nuts.

You should tighten the nuts as the manufacturers recommend in the manual book. Don't forget to re-check every nut and have a test drive to check if the wheel spacers and wheels are sitting smoothly.

Are wheel spacers safe?

If you install a wheel spacer properly then it is perfectly safe. In most cases, when failure is dictated, experts found that the actual problem is in installation but not in wheel spacer. Inappropriate settings of nut, hub, lug, and spacer for the application often run problems. Experienced assume that they witnessed flawless success using wheel spacers.

Wheel spacers pros and cons

The wheel spacer is only dangerous when you don't use it in a proper manner. Most people found it useful, rather some found it problematic for lack of proper guidance.

Pros

  • It boosts the amazing performance of your vehicle as well as increase the gripping power.

  • The brakes of your vehicle properly fit the space and give an opportunity for bigger brakes.
  • It helps to set the wheel to move forward and adjust turning points. It distributes the vehicle's weight among all wheels and improves stability.
  • It enhances wheels' appearance and looks smart due to the pushing outside of your car.
  • In rough or unfavorable weather it increases the traction of your vehicle.
  • It adjusts the composition of the vehicles and resistant to roll over. 
  • It is cost-effective and gives you an amazing driving experience. 

Cons

  • Sometimes it's steering may feel heavier if you fail to choose right measured wheel spacers for your vehicles.
  • It may cause additional wear and tear on your vehicle as you are creating a wider track.
  • Installing wheel spacers only for the backside of your vehicle negatively affects the overall balance of the vehicle.
  • A cheaper wheel may give you a bad experience as they are made of cast aluminum.
  • Installation error can cause spacer crack or additional vibration.

Are wheel spacers bad for your truck?

Are wheel spacers save for racing?

And Finally

Some people may say that using wheel spacers is a terrible idea but if you use it in the right manner following proper guidelines and installation process, it will present you a surprising experience.

Leave a Comment